6 Plant Aeropoic System Instructions
Set - Up Instructions:
1. Pull everything out of the Bin and the Light out of the box, lay everything out and inspect.
2. Plug in your timer *18 hrs ON/6 hrs OFF*and light and hang from a sturdy location a above where you are planning to grow
3. Fill you Bin with 3 gallons of water, BE ACCURATE
4. Connect you air tubing to the air stone and lay inside the bin running the tube out the small cut hole in the lid, and connect to air pump, plug in air pump to check air.
5. Check the water ph now, if you cant, boulder city water usually runs around 6.6 - 7.1, adding a small amount of the ph down will bring it down to 5.9-6.3
* YOU SHOULD NOT ADD MORE THAN HALF OF THE CUP OF PH DOWN *
6. Once you pH is correct add *ONE* cup of each nutrient, A , B , Rhizo
7. Last is to Place the Lid On and Lock it, Then place you cups with your plants in them using Hydroton as a growing medium. Turn on your air pump and leave it on 24hrs, at high output.
8. In Two weeks empty the Bin and repeat steps 5 and 6
| Included Supplies:
|
One Nutrient Cup Includes:
The Nutrients Included and Recommended
|